Journal of
eISSN: 2574-8114
Submit manuscript...
Research Article Volume 6 Issue 4
Theoretical study of the process of interaction of particles of weed impurities in the flow of raw cotton with the working bodies of the cleaning machine
Gaybnazarov Egamnazar Eryigitovich, Abdurakhmonov Akmalzhon Akbarovich
Received: July 04, 2020 | Published: July 28, 2020
Citation: Eryigitovich GE, Akbarovich AA. Theoretical study of the process of interaction of particles of weed impurities in the flow of raw cotton with the working bodies of the cleaning machine. J Textile Eng Fashion Technol. 2020;6(4):153-157. DOI: 10.15406/jteft.2020.06.00244
Abstract
The article proposes to use the Euler equations to describe the motion of a stationary flow in the cleaning zones, which allows determining the laws of pressure, density and velocity distribution along the arc of contact of a moving layer of raw cotton with a mesh surface in the process of impact impact with spikes on the pulp. It has been established that the pressure, densities and flow rates along the cleaning arc as a result of hammer spikes vary in steps, with a decrease in pressure and density and an increase in the flow velocity along this arc.
Keywords: Equations, Friction force, Mass of raw cotton, Ring drums, Mesh surfaces, Dry friction force, Model, Density, Angular velocity, Element motion, Elastic element, Mote model
©2020 Eryigitovich, et al. This is an open access article distributed under the terms of the, which permits unrestricted use, distribution, and build upon your work non-commercially.