Submit manuscript...
MOJ
eISSN: 2574-9773

Polymer Science

Mini Review Volume 1 Issue 2

Recent advances in photo-induced free-radical polymerization

Ewa Andrzejewska, Katarzyna Grajek

Faculty of Chemical Technology, Poznan University of Technology, Poland

Correspondence: Ewa Andrzejewska, Institute of Chemical Technology and Engineering, Faculty of Chemical Technology, Poznan University of Technology, Berdychowo 4, 60-965 Poznan, Poland, Tel +48 61 665 3637, Fax +48 61 665 3649

Received: February 26, 2017 | Published: May 23, 2017

Citation: Andrzejewska E, Grajek K. Recent advances in photo-induced free-radical polymerization. MOJ Poly Sci. 2017;1(2):58-60. DOI: 10.15406/mojps.2017.01.00009

Download PDF

Abstract

The interest in the light-curable systems is continuously growing and the most widely applied photopolymerization reactions are those occurring according to the free-radical mechanism. This mini-review describes some representative trends in investigations of the photo-polymerizing systems.

Keywords: photo-induced polymerization, phase separation, controlled/living polymerization, thiol-ene, hybrid systems, ionogels, polymer gels, nanocomposites, optoelectronics, photoinitiators

Abbreviations

IPNs, interpenetrating polymer networks; CRP, controlled/living radical polymerization; ATRP, atom transfer radical polymerizations; NMP, nitroxide-mediated polymerizations; POSS, polyhedral oligomeric silsesquioxanes; ILs, ionic liquids

Introduction

Free radical photopolymerization dominates most of the industrial applications of photocuring. The most popular are protective coatings, dental fillings, adhesives, inks, lithography (printing plates), stereolithography but also advanced high-technology purposes (micro and optoelectronics, holographic data storage, etc.).1 Currently, radical photo polymerization is also applied to prepare new advanced materials, e.g. nanocomposites, polymer gels, ionogels, polymers with controlled structure, etc. Compared to cationic photopolymerization the free radical initiation is more advanced mainly due to the availability of a wider range of monomers and photoinitiators. Typical chemistry utilized in free radical initiated UV-curable compositions include combinations of mono- and multi-functional (meth) acrylate monomers and (meth) acrylated oligomers, which react readily in the presence of radicals. This mini-review describes some representative trends in investigations of the light-induced polymerization.

Discussion

The light-induced process offers special advantages: short polymerization time (seconds to minutes), low reaction temperature (room or ambient), full control of the process (the polymerization starts when the light is switched on and stops when the light is turned off) and spatial resolution. The general kinetics of the photo-induced radical polymerization have been described earlier (2and references cited herein). In this mini-review only some representative research trends in investigation of the photo-induced polymerization will be discussed.

New photoinitiating systems (PIS)

The development of new free radical initiators or initiating systems working upon low light intensity or soft irradiation conditions is the popular trend in this area of the research. One of the recent achievements is the introduction of the silyl chemistry into PISs. Generated silyl radicals consume oxygen reducing its inhibitory effect and scavenge peroxyls regenerating new silyls.3 The germyl4 and boryl5 chemistries can play a similar role. Another interesting finding is the application of Perovskites as new radical photoinitiators (free radical generators in combination with iodonium salt).6

Polymerization-induced phase separation

Phase separation induced by a chemical reaction is widely applied to materials processing where the molecular architecture of interpenetrating polymer networks (IPNs) is a typical example. This can be realized by direct radical photo-initiated copolymerization of marginally compatible monomers with a progression into a thermodynamically unstable mixture of the monomers and their copolymer.7 Polymerization induced phase separation can also be realized for systems monomer/dissolved polymer.8,9 In this way photopolymerization kinetics may provide a convenient approach to control heterogeneity. The polymerization of such systems shows a multistage kinetics, which results from the appearance of two compositionally different phases, polymerizing more or less independently.7

Controlled/living polymerization

Controlled/living radical polymerization (CRP) has been successfully exploited for preparing polymers with predetermined molecular weights and narrow molecular weight distribution, low polydispersities and precisely controlled architectures.10 The key strategies for CRP are atom transfer radical polymerizations (ATRP), reversible addition-fragmentation chain transfer polymerization (RAFT) and nitroxide-mediated polymerizations (NMP) as well as various variations thereof.10,11 In all the CRP methods photochemical initiation can be applied. This type of initiation enables CRP to proceed under mild thermal conditions by activating the dormant species at low temperature. Application of the UV light is not limited only to generation of initiating radical species but is used also for activation of catalysis, generation of controlling agents or increasing the polymer-end structure.12

Thiol-ene polymerization

Thiol-ene photo polymerizations are reactions between multifunctional thiol and ene monomers; they occur rapidly with formation of low stress homogeneous polymer networks with narrow glass transitions and insensitivity to oxygen inhibition. In particular, thiol-ene photopolymers have gained increased attention in the design of functional materials for tissue engineering, nano-imprinting, shape memory or optical and microfluidic devices.13,14 The propagation mechanism of the thiol-ene photopolymerization is an alternation of addition and chain transfer reactions.15 The most important factor governing the overall kinetics of thiol-ene polymerization is the ratio of the propagation rate constant (kp) to the chain-transfer rate constant, therefore, the reaction kinetics strongly depends on monomer structure.16,17 The thiol-ene reaction has recently attracted researchers due to the recognition of its ‘‘click’’ characteristics.13–15

Hybrid systems

“Hybrid systems” in this review are considered as hybrid materials/hybrid polymers,18 including composites and nanocomposites. These materials can be readily obtained by photo-curing of monomers containing dispersed fillers and this technique is used for a long time in dental applications, protective coatings, etc. The most widely used fillers are aluminum oxide, layered silicates, calcium carbonate, silica and titanium dioxide, both modified and unmodified. Their influence on the photopolymerization kinetics can be very different; e.g. in the case of silica both increase, decrease, or no effect on the polymerization rate was observed.19,20 Recent works indicate that the kinetics depends to a high degree on the stability of the monomer/filler dispersion21,22 or particle size.23 A decreased photopolymerization rate of an acrylate monomer was observed in the presence of nano-TiO2, which was associated with the light absorption by this filler in the range of photoinitiator absorption.24 Recently a lot of attention has been devoted to carbon nanotubes, due to improved mechanical properties of the derived nanocomposites and their electrical conductivity. Both the photopolymerization rate as well as the final conversion substantially decreased with the increase in this filler content, which was ascribed to reduced penetration of the light into the cured films.25,26

Free-radical photopolymerization was applied also for preparation of nanocomposites, hybrid materials and hybrid polymers containing polyhedral oligomeric silsesquioxanes (POSS).27 The resulting materials are often referred to as organic-inorganic hybrid nanocomposites and “nano” refers to the nanoscale dimensions of the POSS core. Most often POSS compounds multi-functionalized with polymerizable groups (vinyl, acrylate) form crosslinked POSS cores and act as anchor points within a polymer matrix; their presence affects the polymerization kinetics of monomer/POSS mixtures due to crosslinking.28–30 However, also such factors like possible aggregation of POSS molecules, possible phase separation and change in formulation viscosity after their addition should be taken into account.

Ionogels

In recent years ionic liquids (ILs) were widely studied as polymerization media in various types of polymerization processes.31 When an IL remains entrapped in the polymer matrix, a gel material is formed, which has been termed ionogel.23 Applications of ionogels include electrolytic membranes (with solid electrolytes), catalytic membranes, drug delivery systems and others.33,34 Most often the radical polymerization of (meth) acrylates in ILs gives increased polymerization rates and higher molecular weights and yields that that in conventional organic solvents or in bulk. Acceleration of the polymerization is associated with the increased propagation rate coefficients and reduced termination rate coefficients.34 Somewhat different situation takes place in the thiol-ene photopolymerization, where in the case of a divinyl ether/dithiol system ILs accelerates the polymerization but the reaction is slower in ILs than in organic solvents.35 A special case are IL monomers, in which the IL moiety and the polymerizable function are linked together; especially strong development in research is observed for new materials based on such monomers.34

Conclusion

Photopolymerization is an important area of investigation due to its wide industrial applications and huge potential in simple and fast production of materials with particular properties. Many modern applications need materials with special morphology and composition (e.g. IPN, block or graft copolymers of various architecture, hybrid polymers, ionogels, etc.); such materials can be readily prepared using photo polymerization technique.

Acknowledgements

None.

Conflict of interest

The author declares no conflict of interest.

References

  1. Yagci Y, Jockusch S, Turro NJ. Photoinitiated polymerization: advances, challenges, and opportunities. Macromolecules. 2010;43(15):6245–6260.
  2. Andrzejewska E. Photopolymerization kinetics of multifunctional monomers. Prog Polym Sci. 2001;26(4):605–665.
  3. Tehfe MA, Louradour F, Lalevée J, et al. Photopolymerization reactions: on the way to a green and sustainable chemistry. Appl Sci. 2013;3(2):490–514.
  4. Tehfe MA, Blanchard N, Fries C, et al. Bis (germyl) ketones: toward a new class of Type I photoinitiating systems sensitive above 500nm? Macromol Rapid Comm. 2010;31(5):473–478.
  5. Telitel S, Schweitzer S, Morlet-Savary F, et al. Soft photopolymerization initiated by dye-sensitized formation of NHC-boryl radicals under visible light. Macromolecules. 2013;46(1):43–48.
  6. Mokbel H, Dumur F, Raveau B, et al. Perovskites as new radical photoinitiators for radical and cationic polymerizations. Tetrahedron. 2016;72(48):7686–7690
  7.  Pfeifer CS, Shelton ZR, Szczepanski CR, et al. Tailoring heterogeneous polymer networks through polymerization-induced phase separation: influence of composition and processing conditions on reaction kinetics and optical properties. J Polym Sci Part A: Polym Chem. 2014;52(13):1796–1806.
  8. Szczepanski CR, Pfeifer CS, Stansbury JW. A new approach to network heterogeneity: Polymerization induced phase separation in photo-initiated, free-radical methacrylic systems. Polymer. 2012;53(21):4694–4701.
  9. Marcinkowska A, Andrzejewska E. Methacrylate-based polymer blends containing oligomeric 1, 2-polybutadienes. J Therm Anal Calorim. 2014;115(2):1719–1726.
  10. Braunecker WA, Matyjaszewski K. Controlled/living radical polymerization: features, developments, and perspectives. Prog Polym Sci. 2007;32:93–146.
  11. Dadashi-Silab S, Tasdelen MA, et al. Photoinitiated atom transfer radical polymerization: current status and future perspectives. J Polym Sci Part A: Polym Chem. 2014;52(20):2878–2888.
  12. Yamago S, Nakamura Y. Recent progress in the use of photo irradiation in living radical polymerization. Polymer. 2013;54(3-5):981–994.
  13. Lowe AB. Thiol-ene “click” reactions and recent applications in polymer and materials synthesis. Polym Chem. 2010;1(1):17–36.
  14. Lowe AB. Thiol-ene “click” reactions and recent applications in polymer and materials synthesis: a first update. Polym Chem. 2014;5(17):4820–4870.
  15. Hoyle CE, Bowman CN. Thiol–Ene click chemistry. Angew Angew Chem Int Ed Engl. 2010;9(9):1540–1573.
  16.  Reddy SK, Cramer NB, Bowman CN. Thiol-vinyl Mechanisms. 2. Kinetic modeling of ternary thiol−vinyl photo polymerizations. Macromolecules. 2006;39(10):3681–3687.
  17. Northrop BH, Coffey RN. Thiol-Ene Click chemistry: computational and kinetic analysis of the influence of alkene functionality. J Am Chem Soc. 2012;134(33):13804–13817.
  18. Alemán J, Chadwick AV, He J, et al. Definitions of terms relating to the structure and processing of sols, gels, networks, and inorganic-organic hybrid materials (IUPAC Recommendations 2007). Pure Applied Chem. 2007;79(10):1801–1829.
  19. Sadej-Bajerlein M, Gojzewski H, Andrzejewska E. Monomer/modified nanosilica systems: photopolymerization kinetics and composite characterization. Polymer. 2011;52(7):1495–1503.
  20. Ziobrowski P, Andrzejewska E, Szybowicz M, et al. Particle clustering in photocurable nanocomposites: Dependence of curing kinetics and viscoelastic properties. J Appl Polym Sci. 2014;131(4):39895.
  21. Sadej-Bajerlein M, Andrzejewska E, Gojzewski H. Monomer/modified nanosilica systems: photopolymerization kinetics and composite characterization. Polymer. 2011;52:1495–1503.
  22. Sadej M, Gojzewsk H i, Andrzejewska E. Photocurable polymethacrylate-silica nanocomposites: correlation between dispersion stability, curing kinetics, morphology and properties. J Polym Res. 2016;23:116.
  23. Sadej M, Andrzejewska E, Kurc B, et al. Surface-dependent effect of functional silica fillers on photocuring kinetics of hydrogel materials. J Polym Sci Part A: Polym Chem. 2014;52(24):3472–3487.
  24. Li F, Zhou S, Gu G, Wu L. UV-curable coatings with nano-TiO2. Polym Eng Sci. 2006;46(10):1402–1410.
  25. Z Dogruyol, G Temel, SK Dogruyol, et al. Investigation of PSt-MWCNT concentration on epoxyacrylate photopolymerization and conductivity of polymer films. Prog Org Coat. 2013;76(6):944–949.
  26. Wang JH, Zhang BY, Qu WZ, et al. The kinetics of photo-polymerization in the fabrication of polymer-dispersed liquid crystals doped with nano-graphite. Liq Cryst. 2010;37(1):1–11.
  27. Cordes DB, Lickiss PD, Rataboul F. Recent developments in the chemistry of cubic polyhedral oligosilsesquioxanes. Chem Rev. 2010;110(4):2081–2173.
  28. Amerio E, Sangermano M, Colucci G, et al. UV curing of organic-inorganic hybrid coatings containing polyhedral oligomeric silsesquioxane blocks. Macromol Mater Eng. 2008;293(8):700–707.
  29. Lin HM, Wu SY, Chang FC, et al. Photo-polymerization of photocurable resins containing polyhedral oligomeric silsesquioxane methacrylate. Mater Chem Phys. 2011;131:393–399.
  30. Andrzejewska E, Marcinkowska A, Wegner K. Nanocomposites obtained by photopolymerization of (methacrylate monomer)/(methacrylate functionalized polyhedral oligomeric silsesquioxane) system. Polimery. 2011;56(nr 1):63–66.
  31. J Lu, F Yan, J Texter. Advanced applications of ionic liquids in polymer science. Prog Polym Sci. 2009;34:431–448.
  32. Vioux A, Bideau JL, Viau L. Ionogels, ionic liquid based hybrid materials. Chem Soc Rev. 2011;40(2):907–925.
  33. Andrzejewska E, Marcinkowska A, Zgrzeba A. Ionogels-materials containing immobilized ionic liquids. Polimery. 2017;62(nr 5):344–352.
  34. Andrzejewska E. Photoinitiated polymerization in ionic liquids and its application. Polym Int. 2017;66(3):366–381.
  35. Zgrzeba A, Andrzejewska E, Marcinkowska A. Ionic liquid-containing ionogels by thiol–ene photopolymerization. Kinetics and solvent effect. RSC Adv. 2015;5(121):100354–100361.
Creative Commons Attribution License

©2017 Andrzejewska, et al. This is an open access article distributed under the terms of the, which permits unrestricted use, distribution, and build upon your work non-commercially.