Short Communication Volume 1 Issue 4
Iranian Medical Council, Iran
Correspondence: Behzad Saberi, Member of the Iranian Medical Council no 24, Shahed South Molasadra Street, Esfahan, Iran, Tel (00)98-(0)9131263487
Received: October 19, 2014 | Published: December 17, 2014
Citation: Saberi B, Damirloojamaat B. A new invention to transfer the patients from ordinary hospital beds to surgical beds and vice versa in two states of railing and transferring, a pictorial review. MOJ Orthop Rheumatol. 2014;1(4):108-110. DOI: 10.15406/mojor.2014.01.00023
The process of transferring the patients from ordinary hospital beds to surgical beds and vice versa is really a long lasting challenge in medicine and surgery. Every health care center which deals with transferring the patients from one bed to another may be encountering with this major problem. This problem will be most pronounced when we would like to talk about the surgical and neurosurgical patients specifically with various degrees of cord injuries and multiple trauma, burned patients, orthopedic patients with disability and inability in movement, patients suffering from cancer and with various degrees of weakness and disabilities and older patients with various degrees of paralysis and movement disorders. Many patients with various degrees of Spinal cord injury need close care because a very small change in the alignment of the fixed spinal cord can cause a very dangerous consequence for them. Also the patients with various degrees of disabilities by any congenital or acquired movement disorders or the patients who are suffering from any fractures specifically in their big bones and joints, during the process of transferring may encounter other problems which can have so many dangerous consequences for them. So finding a way to give an answer to this important question that “How can we transfer the patients from one bed to another without causing any problem for them?” was the foundation of designing and manufacturing a device that can facilitate this difficult process.
Keywords: New Invention, Transferring patients with a mechanical instrument, Patients safety, Surgical and Neurosurgical patients, Patients with cancer and disabilities
In this pictorial review we would like to introduce a new invention in the form of a new device that can solve this important problem of transferring the patients. We could build a device which can transfer the patients from ordinary hospital beds to surgical beds and vice versa in a very safe manner without causing any problem or danger to the patients. In Figure 1, the device can be seen as a whole. Grossly, the device contains some major parts from bottom to top include wheels, Main structure and Engine with some appendices.1–4 In Figure 2, the device can be seen from another angle with a closer look. As it can be seen in this picture, the device has a chassis on one side. When the chassis is being pushed down, a part of the device- which is responsible for elevating the patient from the bed- will come down to its lowest position (Figure 3). After coming to the lowest possible position (which it is directly depends on the basic height of the patient’s bed), the clamps will be attached and closed. After pushing up the chassis, this part of the device will go up and this time the patient will be elevated to the highest point (Figure 4). So the alignment of the spinal cord will not be changed during this movement and the patient can be transfer without human force and with ease. After lifting the patient to the highest point, the patient can be transferred to another bed with wheels and then will be put on the other bed with the same mechanism. The important point regarding this method of transferring is that during the whole process of transferring, the patient is lying in a comfortable position and there would be no external force to apply during the process that may cause any damage to the patient.
In (Figure 5), The Engine of the device can be seen. In (Figure 6), the lower part of the device contains the wheels can be seen. In (Figure 7), the part of the device which the patient will be transferred by that is shown from above. In (Figure 8), the Chassis of the device can be seen.
In summary, to mention the major advantages of this invention we can point to these notes:
This was a summary of explanation of a new invention in medicine and surgery. We really believe that this invention can solve so many problems of the patients and various patients can take advantage of this new device.
None.
The author declares that there is no conflict of interest.
©2014 Saberi, et al. This is an open access article distributed under the terms of the, which permits unrestricted use, distribution, and build upon your work non-commercially.